AS0077601 - Remote GPS Receiver for Doble Model F6150

AS0077601 - Remote GPS Receiver for Doble Model F6150

Remote GPS Receiver for the Doble Model F6150.

Remote GPS Receiver for the Doble F6150 Test Set Operating Instructions
Download PDF(220 kB) »

The Arbiter Systems®, Inc. Remote GPS Receiver provides GPS synchronization for the Doble Model F6150 at the standard GPS frequency (L1 band) of 1575.42 MHz. Thus providing the best timing accuracy for the Model 933A and the Doble Model F6150. Although the remote GPS receiver is sealed against the weather, it is designed for temporary outside operation.

  •  15 m (50 ft) of special antenna cable.
  • Separate power supply
  • Connects directly to the Doble Model F6150 25-pin connector.

Receiver Characteristics

Timing Accuracy

Accuracy UTC/USNO

± 1 µs (only need one satellite with correct position)

Position Accuracy

10 meters, rms, 90 % confidence

Satellite Tracking

Twelve (12) channel, C/A code (1575.42 MHz). Receiver simultaneously tracks up to twelve satellites.

Acquisition

  • 2 minutes, typical, cold start

I/O Configuration

Output Connectors

DB-15

Power Requirements

Standard

Voltage

Input: 100Vac to 240 Vac, 50 Hz to 60 Hz, IEC-320 Socket
Output: 9 Vdc, 1 A, 2.5 mm x 5.5 mm Female, Center Positive

Inlet

IEC-320 with fuse and mating P09 cordset.

General

Physical

Size

172 mm x 357 mm x 324 mm (6.75 in x 14 in x 12.75 in)
483 mm x 483 mm x 203 mm (16 in x 16 in x 8 in), shipping

Weight

4.5 kg (10 lbs), net
5.5 kg (12 lbs), shipping

Environmental

Temperature

Operating: - 10 °C to + 50 °C
Nonoperating: - 40 °C to + 75 °C

Humidity

Noncondensing

There are no additional Options available for this product.
Included
CA0021315 1 15 m (50 ft) RG-6 Antenna Cable
Available
AS0033100 Rack Slide Kit
AS0044600 Antenna Mounting Kit
AS0044700 2 21 dB In-Line Pre-amplifier
AS0048900 Antenna Grounding Block Kit
AS0094500 GNSS Surge Protector
CA0019806 RS-232 Null Modem Cable, DB9F-DB9F, 2 m (6 ft) length
CA0021302 1 2 m (6 ft) RG-6 Antenna Cable
CA0021306 1 6 m (20 ft) RG-6 Antenna Cable
CA0021330 1 30 m (100 ft) RG-6 Antenna Cable
CA0021345 1 45 m (150 ft) RG-6 Antenna Cable
CA0021360 1 60 m (200 ft) RG-6 Antenna Cable
CA0021375 1 75 m (250 ft) RG-6 Antenna Cable
CA0022500 Option 28 System Frequency Reference Cable, 6 m (20 ft)
CN0019202 Mating Connectors, 2-pole, 5 mm
CN0019203 Mating Connectors, 3-pole, 5 mm
CN0027700 Type F, Male, RG-6 Antenna Cable Crimp-on Connector
CN0027800 Type F, Male, RG-11 Antenna Cable Crimp-on Connector
CN0031400 Type F, Male, RG-6 Plenum Rated Antenna Cable Crimp-on Connector
TF0006000 Type F, RG-11 Antenna Cable Crimp Tool
TF0006400 Type F, RG-6 Antenna Cable Crimp Tool
TF0013200 Antenna Cable Stripping Tool, RG-6
TF0013300 Antenna Cable Stripping Tool, RG-11
WC0004900 1 300 m (1000 ft) Roll RG-11 Cable
WC0005000 1 300 m (1000 ft) Roll RG-6 Cable
WC0005200 1 300 m (1000 ft) Roll RG-6 Plenum Rated Cable
WC0006600 IRIG-B Distribution Cable (custom length)

1 Stocked length. Custom lengths available from 0.3 m (1 ft) to 300 m (1000 ft). Contact factory.
2 Used for cable lengths greater than: RG-6 75 m (250 ft) ; RG-11 120 m (400 ft)

No software downloads available for this product
 
No additional software information is available for this product
No firmware Downloads are available for this product
 
No additional firmware information is available for this product
Quick Model Search
Search Arbiter.com
 advanced search help »


phone
(US, Canada, Mexico only) 800.321.3831 +1.805.237.3831

email
sales@arbiter.com

Find a Local Representative